Installation - Topcom BUTLER 3055 User Manual

Butler 3055

1 INSTALLATION

Before you use the telephone for the first time, you must first make sure the battery is charged
for 20 hours. If you do not do this, the telephone will not work optimally.
For installation, do the following:
• Plug one end of the adaptor into the outlet and the other end into the adapter jack on the
bottom of the telephone.
• Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the telephone.
telephone connection
adapter outlet
• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 20 hours. The Line/Charge indicator
the base unit will light up.
143 143 143 143 143 143 143 143 143 143 143 143
adapter jack
wall phone jack
(LED) on
+ -
- +