ABI Attachments ABI Force Z-23 Owner's Manual page 22

Using Drag Connect Ears
Chains are attached to each ear using spring loaded clips.
The other end of the chain is connected to a pull-behind
drag mat type attachment. This style of attachment is
adjusted by changing the length of the connection chains.
Figure 19: Dragmat ears
Hydraulic Rear Lift: INSTALLATION
1. Secure the lift arm to the bottom mount bracket using the
provided pin.
2. Attach the hydraulic ram to the top mount bracket using
the provided pin. Ensure the hydraulic hoses are facing right
when viewed from the rear.
3. Plug in hydraulic connections to rear quick connect ports.
Figure 20: Rear lift installed
4. Use the right hydraulic function control lever to lift/lower
the rear hydraulic lift arm.
Hydraulic Rear Lift: USE
Attachments can be lifted by attaching chains to the lift arms
on the provided slots. See Figure 21. If the articulating rear
hitch system is used then these slots provide the lift for it.
Figure 21: Rear lift attachment
Trailer Hitch
Figure 22: Trailer hitch
WARNING!
attachment to rear of the ABI Force. Handling,
stability, and control could all be affected.
WARNING!
tongue weight and always stay on level surfaces.
Damage to equipment and injury could result.
22
Never attach any non-approved
Never exceed 750 lbs towed/100 lbs