Subscribing A Handset To A B24Xx, 28Xx, 29Xx, 32Xx, 40Xx, 46Xx; Subscribing Butler 4011 Handset On Another Base (Other Brand/Model) - Topcom BUTLER 4011 SIM User Manual

4.23 Subscribing a handset to a B24xx, 28xx, 29xx, 32xx, 40xx, 46xx

In order to be able to make and receive telephone calls, a new handset has to be subscribed
to the base unit. You can subscribe 5 handsets to one base unit. By default, each handset is
subscribed as handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
• the handset subscription has been removed from the base unit (e.g. for reinitialisation)
• you want to subscribe a different handset to this base unit.
The underlined procedure is only applicable to a B40XX handset and base unit!!
Keep the Paging key
indicator on the base unit begins to blink rapidly. The Line/Charge indicator
rapidly for one minute. During this minute, the base unit is in subscribing mode and you must
do the following to subscribe the handset:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'BASE _' appears on the display.
• Enter a number of the base unit you would like to subscribe the handset to (1-4). Use the
number keypad.
Each handset can be subscribed to 4 different DECT base units. Each base
unit is assigned a number from 1 to 4 in the handset. When you subscribe a
new handset, you can assign a base unit number. It is best to use '1'.
• 'SEARCHING' and the symbol
• The RFPI code (each base unit has a unique RFPI code) appears on the display and a
signal sounds when the handset has found the base unit.
• Press the Programming key
• 'PIN' appears on the display.
• Enter the 4-digit PIN code of the base unit in (default PIN code is '0000'). Use the
number keypad.
• Press the Programming key
• The handset is subscribed to the base unit.

4.24 Subscribing Butler 4011 handset on another base (other brand/model)

Put the base in subscription mode (see manual of the base). If the base is in subscribing
mode, you have to do the following to subscribe the handset:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'BASE _' appears on the display.
• Enter a number for the base unit to which you would like to subscribe the handset (1-4).
• Use the number keypad.
• 'SEARCHING' and the symbol
Topcom Butler 4011/4011C Sim
on the base unit pressed for 10 seconds until The Line/Charge
.
repeatedly until 'BASE SUB' appears on the display.
.
appears on the display.
.
.
.
repeatedly until 'BASE SUB' appears on the display.
.
appear on the display.
Topcom Butler 4011/4011C Sim
will blink
23