Table of Contents
Advertisement
Topcom Butler 4011/4011C Sim
4.5
Transferring a call to another handset
•
You have an external caller on the line.
•
Press the INT key
•
The external call is now on hold.
•
'INT' appears on the display.
•
Dial the number of the handset to which you would like to transfer the call.
•
If the handset dialled is answered, you can have an internal conversation. Press the
Line key
and the external call is transferred.
•
If the handset dialled is not answered, press the Down key
caller again.
4.6
Out of Range Warning
If the handset is out of range of the base unit, a warning signal will sound.
•
'SEARCHING' appears on the display and the symbol
•
Move closer to the base unit.
•
As soon as you are back within range of the base unit, a signal sounds and the
symbol
stops blinking.
4.7
Setting the speaker volume
Use the Volume/Ringer key
from 5 levels. The telephone is set to level '3' by default.
During a call, you can change the volume:
•
Press the Volume/Ringer key
•
The volume level currently set appears on the display.
•
Use the number keys to set the desired level (1-5).
•
Press the Volume/Ringer key
You have 8 seconds to set the desired volume; if you do not, the telephone
returns to standby mode and the volume remains unchanged.
4.8
Call Duration Indicator on the display
As soon as you press the Line key
seconds).
E.g. " 01-20 " for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.9
Turning off the microphone (mute)
It is possible to turn off the microphone during a call by pressing the Delete/Mute key
you can speak freely without the caller being able to hear you.
•
You are on the phone. The Line/Charge indicator
and the Call symbol
•
Press the Delete/Mute key
•
The symbol 'X' appears on the display (
12
twice.
/
to set the volume of the speaker (handset). You can select
/ .
/
to confirm your selection.
the call duration appears on the display (minutes-
appears on the display.
to turn off the microphone.
blinks on the display.
(LED) on the base unit will blink
).
to speak to the external
Topcom Butler 4011/4011C Sim
. Now
Advertisement
Table of Contents
Need help?
Do you have a question about the BUTLER 4011 SIM and is the answer not in the manual?
Questions and answers