When the camera is turned on but inactive for a period of time, the camera
automatically shuts down to save battery power.
When there is no activity for over 3
minutes, the camera will enter sleep
mode.
While in sleep mode, the green light will flash. The
LCD monitor will turn off and the CPU will also be
in sleep mode.
To cancel Sleep mode, press the SHUTTER button, or
any other button on the back of the camera. You can
also simply turn the DIAL SWITCH.
When the camera is left in Sleep
mode for over 10 minutes, it will
shut down automatically.
The lens will retract and the lens cover will close.
RESETTING THE AUTO POWER SAVE
You can change the setting for Auto Power Save. The default is 3 minutes, but
you can also choose 1, 5 or 20 minutes.
Use the ▲▼ buttons to choose
"Power Save".
Use the
setting.
When using an AC adapter
When you are using an AC adapter, the camera will enter sleep mode after 20 minutes (no
matter what the settings). The camera will automatically turn off 5 minutes after it has entered
sleep mode.
84
AUTO POWER SAVE
Turn the DIAL SWITCH to SET UP MODE and
then turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
buttons to change the
Indicator light(green)
LCD monitor