Using The Self Timer ̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶31; Self Timer; Short Self Timer - Epson L-300 User Manual

Use the self-timer when you are recording an image of yourself or a group that
includes you. Also, this feature will eliminate blurring.
Press the MENU button and select
SELF TIMER by using the
buttons.
Select either 2 sec. or 10 sec. by
using the ▲▼ buttons.
Short Self Timer
Shots taken at night, at sunset or in MACRO mode can easily become blurred. The shot often
becomes blurred when the camera moves (because the shutter is open) while the shutter button
is pressed down. When using the Short Self Timer the shutter is set to release 2 seconds after
the button has been pressed, helping you to take photos that are not blurred. The light will flash
quickly for 2 seconds before the shutter goes off.
Center the image and press the SHUTTER button.
In the 10-sec. mode, the light flashes slowly for
8 seconds, then faster for the last 2 seconds
before the shutter releases.
If you want to stop the process after pressing the
shutter button in self timer mode, just press the
MACRO button.
EPSON recommends using a tripod or placing the
camera on a flat horizontal surface when using this
mode.
USING THE SELF TIMER
Turn the DIAL SWITCH to PHOTO MODE and
then turn the POWER ON.
MENU Button
Button
Button
Button
Button
Light will flash slowly
for 8 seconds
Light will flash quickly
for 2 seconds
Shutter will release
Illumination Light
31