Epson L-300 User Manual page 103

MESSAGE
Printer error.
There is no response from
the printer.
Could not print.Try printing
again?
Could not print.
A communication error has
occurred.
xx images could not be
printed.
Cannot print because the
necessary Frame file does
not exist or is corrupted.
This function cannot be
performed from the camera
with the printer you are
using.
This printer is not
supported.
Parts inside your printer
require maintenance.
PROBLEM & SOLUTION
Problem:There may be a problem with the printer.
Solution:Turn the printer off for a few seconds then turn the power
back on. If the error message still appears, turn the power
off and check to see if there is anything (packing materials,
paper) stuck inside the printer. Then turn the power back
on.
Problem:The printer has frozen and won't communicate with the
camera.
Solution:Check the camera to printer connection. Check that the
printer power is turned on. See the printer instruction
booklet for further details.
Problem:If the printer is in the middle of printing something, it may
not be able to accept the next request.
Solution:Restart the printer or wait until the current print run is
finished and then try again.
Problem:The printer has rejected the print request.
Solution:If neither of the above works, see the printer instruction
booklet for further remedies.Restart the printer or resend
the request from the camera. If none of these remedies
work, contact your nearest Epson Customer Support.
Problem:Either the cable has been disconnected or the power has
been turned off.
Solution:Recheck that the cable is connected, turn the power back
on and try again.
Problem:If some of the images were taken with another camera or
have been changed by software, only the images taken
with this camera will be printed.
Solution:Use the actual camera or computer that was used to create
the images in order to print them.
Problem:The picture can't be printed because there is no frame file
or the link has been broken.
Solution:Replace or add a frame linked to this file. (See page 49.)
Problem:The printer does not support this function.
Solution:You can try to clean it in some other way, but the printer
doesn't support the camera's function.
Problem:The printer isn't made for direct printing.
Solution:Make sure the printer supports direct printing before you
buy it.
Problem:The printer cannot print because the components within
the printer needs adjusting.
Solution:Turn the printer off for a few seconds then turn the power
back on. If the error message still appears, consult the
shop you bought your printer from or the Epson Customer
Support.
101