Resetting Video Out; Setting The Menu Language - Epson L-300 User Manual

You may have to reset the "video out" to match the national video system of
wherever you may be showing pictures.
Use the ▲▼ buttons to choose
"Video out".
Use the
setting.
About Video Signals
There are two available settings, NTSC and PAL,
each used in different countries.
SETTING THE MENU LANGUAGE
You can change the language displayed on the LCD monitor.
Use the ▲▼ buttons to choose
"Language".
Use the
language list.
Use the ▲▼
the language you want to use for
the LCD monitor. Press the FLASH
button to confirm the selection.
RESETTING VIDEO OUT
Turn the DIAL SWITCH to SET UP MODE and
then turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
buttons to change the
Turn the DIAL SWITCH to SET UP MODE and
then turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
buttons to select the
buttons to highlight
87