Set Up Mode Messages; Direct Printing Messages - Epson L-300 User Manual

MESSAGE
Not enough free space on
the memory card.
Not enough free space in
the camera's memory.
A Frame with the same
name already exists.
Replace it with this Frame?
MESSAGE
Battery power is low.
Connect AC adapter.
Make sure that the printer
is on and connected.
Black ink out. Replace the
black ink cartridge.
Color ink out. Replace the
color ink cartridge.
Check the ink cartridges.
Paper out. Load paper.
Paper jam.
This image cannot be
printed.
100
SET UP MODE MESSAGES
Problem:Not enough memory left on the card to record the picture.
Solution:Either delete some pictures or reformat the card. (See
pages 36-37.)
Problem:Not enough camera memory to transmit the frame.
Solution:Delete one or more PIF frames from camera memory.
(See page 48.)
Problem:Another frame with this name exists either on the memory
card or in the camera.
Solution:You may choose to replace it. Please note that the new file
will overwrite the existing one.
DIRECT PRINTING MESSAGES
Problem:Little battery power remaining.
Solution:The camera won't continue to direct print when the power
is low. Connect to AC power.
Problem:The DP cable is disconnected; the printer selected doesn't
support the direct printing; is connected to another device
(other than a computer), the printer power is turned off.
Solution:Reconnect the camera correctly to the printer and turn the
printer power on. (See page 66.)
Problem:The printer is out of black ink.
Solution:Replace the black cartridge following the printer instruction
booklet.
Problem:The printer is out of colored ink.
Solution:Replace the colored cartridge(s) following the printer
instruction booklet.
Problem:An ink cartridge is missing or not set properly in the printer.
Solution:Set or reset ink cartridge(s) following the printer instruction
booklet.
Problem:The paper isn't set properly in the printer.
Solution:Set or reset the paper following the printer instruction
booklet
Problem:A sheet of paper has jammed during printing.
Solution:Clear the jam following the printer instruction booklet.
Problem:You have selected an image that can't be printed.
Solution:Select another image.
PROBLEM & SOLUTION
PROBLEM & SOLUTION