Dimm Installation; Dimm Removal - Supermicro X11DPG-OT-CPU User Manual

Super X11DPG-OT-CPU User's Manual

DIMM Installation

1. Follow the instructions given in the
memory population tables provided in the
previous section to install memory modules
on your motherboard. For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard. (See the note below.)
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
Note: All graphics including the layout drawing above are for reference only. Your sys-
tem components may look or may not look the same as graphics shown in this guide.
BIOS
LICENSE
Release Tabs
Press both notches
straight down into
the memory slot.
34
11DPG-OT-CPU
REV:1.00
Notches