Supermicro X11DPG-OT-CPU User Manual page 13

Peripheral Devices
•
Four (4) USB 3.0 ports on the rear I/O panel (USB 1/2, USB 3/4)
•
One (1) Type A USB 2.0 connector (USB 0)
BIOS
•
64 MB SPI AMI BIOS ® SM Flash UEFI BIOS
•
ACPI 3.0/4.0, USB keyboard, Plug-and-Play (PnP), SPI dual/quad speed support, riser-card auto detection support, and
SMBIOS 2.7 or later
Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used.)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V standby, +5V, +5V standby, +12V, CPU core, memory, chipset, BMC, PCH,
and battery voltages
•
CPU System LED and control
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 205W (See Note 1 on next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Low-noise fan speed control
•
Pulse Width Modulation (PWM) fan control
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
UID (Unit Identifi cation)/Remote UID
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis intrusion header and detection
LED Indicators
•
CPU/Overheating
•
Fan Failure
•
M.2 Power LED
•
UID (Unit Identifi cation)/Remote UID
Dimensions
•
19.50" (L) x 17.00" (W) (495.30 mm x 431.80 mm)
Motherboard Features
13
Chapter 1: Introduction