Super X11DPG-OT-CPU User's Manual
Motherboard Features
CPU
•
This motherboard supports dual 81xx/61xx/51xx/41xx/31xx (Socket P) processors which offer Intel® Ultra Path Interconnect
(UPI) of up to 10.4 GT/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 3TB of 3DS Load Reduced DIMM (3DS LRDIMM)/Load Reduced DIMM
(LRDIMM)/3DS Registered DIMM (3DS RDIMM)/Registered DIMM (RDIMM) DDR4 (288-pin) ECC 2666/2400/2133 MHz
modules in 24 slots
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C622 PCH
Expansion Slots
•
Four (4) SMCI-proprietary PCI-Express x24 slots (J31/J32, J33/J34)
BaseBoard Management Controller (BMC)
•
ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One (1) IPMI dedicated LAN located on the rear IO backpanel
Graphics
•
Graphics controller via AST 2500 BMC
I/O Devices
•
Ethernet LAN Ports
•
IPMI Dedicated LAN
•
Serial (COM) Port
•
SATA 3.0
•
RAID (PCH)
Motherboard Features
•
Two (2) 10GbE Ethernet LAN ports 1/2 on the I/O back panel
•
One (1) 1 Gigabit IPMI LAN supported by the AST 2500 BMC the I/O back panel
•
One (1) Fast UART 16550 port on the I/O back panel
•
Eight (8) (I-)SATA 3.0 connections supported by two SATA headers (JS1: SATA
0-3, JS2: SATA 4-7)
•
One (1) S-SATA 3.0 port with power-pin built-in (S-SATA0) (Note: S-SATA0 also
supports Supermicro SuperDOM.)
•
RAID 0, 1, 5, 10
12