Table of Contents
Advertisement
INSTALLATION OPTIONS
Your telephone base is ready for tabletop use. If you want to mount your telephone
on a wall, follow the steps to connect the telephone base with a standard dual-
stud telephone wall mounting plate. You may need a professional to install the
mounting plate.
Tabletop to Wall Mount Installation
1.
Unplug the power adaptor from the power outlet. Unplug the telephone line
cord from the wall jack (or DSL ilter).
2.
Put the corded handset aside. Hold down the switch hook on the telephone
base, and then slide the handset tab upwards to remove it from the slot.
Rotate the handset tab by 180 degrees. Then, replace the handset tab into the
slot until it locks into position.
3.
Press down on the tabs of the wall mount bracket to release it from tabletop
orientation.
4.
Rotate the wall mount bracket down and push it into the telephone base until
it clicks into place.
Plug the telephone line cord (or DSL ilter) into the wall jack. Plug the power
5.
adaptor into a power outlet. Align the slots on the back of the telephone base
with the studs of the wall mounting plate.
6.
Slide the telephone base down until it locks securely. Bundle the telephone
line cord and power adaptor cord neatly with twist ties.
1
4
2
5
7
3
6
Advertisement
Table of Contents
