Table of Contents
Advertisement
2.6
Installation Options
Your telephone base is ready for tabletop use. If you want to mount your telephone on
a wall, follow the steps below to connect the telephone base with a standard dual-stud
telephone wall mounting plate. You may need a professional to install the wall
mounting plate.
2.6.1
Tabletop to Wall Mount Installation
1.
With the upper tabs (marked A) on top, align the holes of the wall mount bracket
with the studs on the standard wall mounting plate and slide the bracket down
until it locks securely.
2.
Plug one end of the telephone line cord into the jack on the bottom of the
telephone base and plug the other end into the telephone wall jack (or DSL filter).
Plug the small end of the telephone base power adapter into the jack on the
bottom of the telephone base and plug the other end into an electrical outlet not
controlled by a wall switch. Route the telephone line cord and the power cord
through the grooves at the bottom of the telephone base accordingly.
7
Hide quick links:
Advertisement
Table of Contents
