1. Unpacking Your Fan.
Carefully open the packaging. Remove items from
Styrofoam inserts. Remove motor housing and place
on carpet or Styrofoam to avoid damage to finish.
Do not discard fan carton or Styrofoam inserts
should this fan need to be returned for repairs.
Check against parts inventory that all parts have
2. Parts Inventory.
c. 6in. downrod and hanging ball. 1 piece
i. glass housing support. 4 pieces
k. threaded rod assembly. 1 piece
l. finial plate (pre-attached to threaded rod
m. finial (pre-attached to threaded
o. glass shade support. 1 piece
r. remote control cover. 1 piece
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
a. hanging bracket. 1 piece
b. canopy. 1 piece
d. 2.75in. downrod. 1 piece
e. motor assembly. 1 piece
f. yoke cover. 1 piece
g. glass housing. 1 piece
h. blade. 4 pieces
j. light kit fitter. 1 piece
assembly). 1 piece
rod assembly). 1 piece
n. glass shade. 1 piece
p. wall control. 2 pieces
q. plate.1 piece
s. faceplate. 3 pieces
t. hardware packs
4 x 25 watt max. candelabra base bulbs
2 x 60 watt max. candelabra base bulbs