Table of Contents
Advertisement
3.14 Transmitter power output
The transmitter supports several power output modes to
help you select the optimal settings for your requirements
whilst helping to prolong battery life.
3.14.1 Adjusting power output
To adjust the power output:
1.
Switch on the transmitter.
2.
Press the
or
keys to increase or decrease
power output.
3.14.2 Boost (Tx-3 and Tx-10 only)
Boost allows the transmitter to output its maximum
wattage for a specified period of time in minutes.
WARNING! The transmitter is capable of
outputting potentially lethal wattages. Exercise
extreme caution when using Boost.
To configure boost:
1.
Switch on the transmitter.
2.
Press the
key to enter the menu.
3.
Scroll to the BOOST option using the
4.
Press the
key to enter the BOOST menu.
5.
Set the BOOST duration using the
You can choose 5, 10, 15 and 20 minute periods.
6.
Press the
key to accept your changes and exit the
BOOST menu.
7.
Press the
key to exit the menu.
To enable boost:
1.
First configure the boost duration using the procedure
above.
2.
Press and hold the
the transmitter LCD.
3.
The transmitter will automatically exit boost mode
after the allotted duration.
To disable boost:
1.
Press and hold the
or
arrows.
or
arrows.
arrow until BOOST appears on
arrow to switch boost off.
RD7000+ Operation Manual 11
Advertisement
Table of Contents
