Page 1
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
SDSL NETWORK EXTENDER SUBSCRIBER FEDERAL COMMUNICATIONS COMMISSION INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is...
SDSL NETWORK EXTENDER SUBSCRIBER NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
Page 4
SDSL NETWORK EXTENDER SUBSCRIBER 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
SDSL NETWORK EXTENDER SUBSCRIBER TRADEMARKS USED IN THIS MANUAL Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Step #1: Unpacking the Unit Unpack the Network Extender and power supply. If anything appears to be broken or missing, contact Black Box immediately at 724-746-5500. Step #2: Plug in the Power Supply Plug the power supply into both the power source and the back of the unit. It does not matter which order.
Page 7
SDSL NETWORK EXTENDER SUBSCRIBER Step #4: Verify the DSL Connection Verify the DSL connection via the “Available SDSL Connection” LED on the front of the Extender. A steadily pulsing LED (once per second) indicates that the DSL connection is established and operational. NOTES For an overview of the unit’s LEDs and their functions, refer to LED Indicators on the next page.