Attaching The Mounting Brackets To The Switch Chassis (For The S5820X-28S And S5820X-28C) - H3C S5820X Series Installation Manual

Attaching the mounting brackets to the switch chassis (for the
S5820X-28S and S5820X-28C)
To attach the mounting brackets in one of the mounting positions:
1. Align the mounting brackets with the screw holes in the front mounting position
mid-mounting position
how to attach a 1U bracket to the 1U S5820X-28S switch. For how to attach a 2U bracket to the
2U S5820X-28C switch, see
2. Use M4 screws (supplied with the switch) to fix the mounting brackets to the chassis.
NOTE:
You secure the mounting brackets to both sides of the chassis in the same way.
Figure 26 Attach a 1U mounting bracket in the front mounting position of the S5820X-28S switch
Figure 27 Attach a 1U mounting bracket in the mid-mounting position of the S5820X-28S switch
Figure 28 Attach a 1U mounting bracket in the rear mounting position of the S5820X-28S switch
(Figure 27), or the rear mounting position
Figure 29.
33
(Figure
(Figure 28). These figures show
26),