H3C S5820X Series Installation Manual page 23

Power
Specifications
module
•
•
LSVM1AC650
•
•
•
LSVM1DC650
•
•
•
LSVM1AC300
•
•
•
LSVM1DC300
•
CAUTION:
Do not install a 650 W power module (LSVM1AC650 or LSVM1DC650) and a 300 W power module
•
(LSVM1AC300 or LSVM1DC300) on the same S5820X-26S switch.
In power redundancy mode, you can replace a power module without powering off the switch but must
•
strictly follow the installation and procedures in
damage to the switch.
Figure 9 Installation and power-on procedure
Install the Install the
power module power module
Figure 10 Power-off and removal procedure
Switch off the Switch off the
power module power module
Rated input voltage range:
100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max input voltage range:
90 VAC to 264 VAC @ 47 Hz or 63 Hz
Max output power:
650 W
Rated input voltage range:
–40 VDC to –60 VDC
Max input voltage range:
–40 VDC to –72 VDC
Max output power:
650 W
Rated input voltage range:
100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max input voltage range:
85 VAC to 264 VAC @ 47 Hz or 63 Hz
Max output power:
315 W
Rated input voltage range:
–48 VDC to –60 VDC
Max input voltage range:
–36 VDC to –72 VDC
Max output power:
315 W
Connect the Connect the
power cord power cord
Disconnect the Disconnect the
power cord power cord
Switch
chassis
S5820X-26S
S5820X-26S
S5820X-26S
S5820X-26S
Figure 9 and Figure 10
Switch on the Switch on the
power module power module
Remove the Remove the
power module power module
15
Reference
H3C LSVM1AC650 &
LSVM1DC650 Power
Modules User Manual
H3C LSVM1AC650 &
LSVM1DC650 Power
Modules User Manual
H3C LSVM1AC300 &
LSVM1DC300 Power
Modules User Manual
H3C LSVM1AC300 &
LSVM1DC300 Power
Modules User Manual
to avoid any bodily injury or