Rear Panel; S5820X-28C Panel Views; Front Panel - H3C S5820X Series Installation Manual

Rear panel

Figure 5 S5820X-28S rear panel
(1) Power module slot 1
(3) Hot swappable fan tray
NOTE:
The S5820X-28S switch comes with power module slot 1 empty and power module slot 2 covered by a
filler panel. You can install one or two power modules for your switch as needed. In this figure, two
PSR300-12A AC power modules are installed in the slots.

S5820X-28C panel views

Front panel

Figure 6 S5820X-28C front panel
(1) Expansion interface card slot
(3) Port mode LED
(5) Power supply 1 status LED (PWR1)
(7) OAP card status LED (SLOT3)
(9) USB port
(11) 10/100/1000Base-T auto-sensing Ethernet port
(13) SFP+ port
(2) Power module slot 2
(4) Grounding screw
(2) Seven-segment LED
(4) System status LED (SYS)
(6) Power supply 2 status LED (PWR2)
(8) Port mode LED switching button
(10) Console port
(12) 10/100/1000Base-T Ethernet port LED
(14) SFP+ port LED
6