Mounting Bracket And Cable Management Bracket Kits - H3C S5820X Series Installation Manual

Table 23 Install an S5820X-28S or S5820X-28C switch in the rack
Mounting bracket position
•
Rear mounting (near the
power supplies)
•
Front mounting (near the
network ports)
•
Mid-mounting

Mounting bracket and cable management bracket kits

Table 24 Mounting bracket and cable management bracket kits for the H3C S5820X Switch Series
Switch
S5820X-26S
S5820X-28S
S5820X-28C
Figure 20 1U mounting bracket kit
The S5820X-28C switch comes with a pair of cable management brackets for managing and routing
cables. When shipped, the cable management brackets are secured to the mounting brackets, as shown
in Figure 21.
Installing the mounting
brackets
See "Attaching the mounting
brackets to the switch chassis
(for the S5820X-28S and
S5820X-28C)."
Mounting bracket
One pair of 1U mounting
brackets (supplied with the
switch)
One pair of 2U mounting
brackets (supplied with the
switch)
Installing chassis
rails and slide rails
Not required.
Cable management
bracket
N/A
One pair (supplied
with the switch)
29
Installing the
switch
See
"Rack-mounting
the S5820X-28S
or S5820X-28C
switch."
Bracket view
See Figure 20.
The mounting brackets and cable
management brackets are secured
together by default (see Figure 21).