Attaching Mounting Brackets And Cable Management Brackets To The Rack; Installing Cable Management Brackets - H3C S10504 Installation Manual

Figure 8 Installing cage nuts (S10508 as an example)
(1) Cage nuts
Attaching mounting brackets and cable
management brackets to the rack
Before installing the switch to the rack, install the cable management brackets and mounting brackets
shipped with the switch. Cable management brackets (signal cable and power cable management
brackets) are used for cabling the switch, and mounting brackets are used for attaching the chassis to the
rack.

Installing cable management brackets

Install the signal cable management brackets separately for the S10508-V switch. All other S10500
switches come with the signal cable management brackets secured to the mounting brackets. In this step,
you only need to install the power cable management brackets for them.
• The S10508-V has two cable management brackets—the signal cable management brackets are
installed at the upper part of the switch, and the power cable management brackets are installed
12