Leica Ultra User Manual page 91

Ultra, Fault Finder on Ultra Advanced
5. With back toward transmitter, move down faulted cable a few meters/feet from trans-
mitter.
6. Center fault probe over the cable and ensuring that no services are below push it into
the soil.
7. Numbers will appear above the flashing home icon.
Once they do, press and hold Frequency key to home the fault system.
8. After system is successfully homed, a chime will sound and an arrow will appear, as
shown. This indicates the fault is located toward the top of the screen.

Keep fault probe and locator oriented the same while fault finding.
91