Technique - Leica Ultra User Manual

9.3
Procedure
Peak signal method
Ultra, Locate Sonde Signal

Technique

1. Turn on locator.
2. Set operating mode to sonde location.
3. Set antenna configuration to Total Field.
4. Place sonde into the pipe and move it down the pipe.
5. Locate sonde using peak or null methods.
Peak location is the preferred method in most situations.
When the peak signal is in range, rotation arrows will appear.
a
b
1. Follow arrows to rotate the locator handle so that it is perpendicular to the sonde.
2. Follow fore/aft arrow to locate the approximate sonde position.
a) Fore/aft arrow
b) Null point
73