14.4
Operating modes and
frequencies
Locating ranges
Depth estimate
tolerances
Ultra, Technical Data
System Operation Technical Data
Mode
Active cable, standard
Passive cable, standard
Sonde, optional, locate/depth only
Radio, optional, locate only
Type
Cables
Sondes
Locators are calibrated at factory frequencies to these tolerances under ideal test condi-
tions. Actual operating conditions may have signal distortions or noise sources which result
in depth estimate errors. Tolerances do not apply to offset depth estimates.
Type
Passive cable ±10%
Active cable ±5%
Sonde ±5%
Frequency
Up to 100 frequencies
60 Hz, 120 Hz, 180 Hz, 50 Hz, 100 Hz,
150 Hz
Any frequency
-
Range
4.6 m / 15'
3.0 m / 10'
Tolerance
0.15-3 m / 0.5-10'
0.2-3 m / 0.2-10'
0.15-3 m / 0.5-10'
114