Direction Enable - Leica Ultra User Manual

5.5
Using Direction Enable
Ultra, Locate Active Signals

Direction Enable

Direction Enable allows the operator to set a reference for current flow on a target line. It is
useful for maintaining line identity on jobsites where multiple utilities are present.
Direction Enable is only available:
• In transmitter mode
• At frequencies of 10 kHz and below.
a
1. On the transmitter menu, navigate to Settings > Output > Direction Enabled and
select Enable.
2. Ensure the function is available by looking for the Direction Enable icon on the locator.
3. Stand approximately 10 ft (3 m) from the transmitter with the locator positioned so that
the compass heading is parallel to the target line. Face away from the transmitter.
b
c
a) Direction Enable icon
b) Arrow on compass heading
c) Compass heading
60