Fixing The Appliance To The Wall - VESTEL AKILLI NF545 A++ Instruction Booklet

Fixing the appliance to the wall

Note: This fixing part should be used for in the case of , the appliance is out off ballance
when then the inside of the appliance is fully empty but the door shelves are full with stuffs.
Part No Description
4 Screw M4 No:4
Screw for plastic
3
No:3 (Ø 3,5mm)
2 Fixing Bracket
1 Screw grommet
For usage please follow the below instructions:
1. Check the kit to locate the following parts.
2. Prepare a star-tip screwdriver for fixing the screws.
3. Prepare a driller for making hole to the wall.
4. Put the refrigerator, where you will use it.
5. Refere the holes, which has been drilled before on the top of the refrigerator, and mark
the hole places on the wall.
6. Drill the holes on the wall with Ø 8 mm.
7. Put screw grommet (Part no: 1) in to the hole.
8. Assemble the fixing part (no: 2) to the wall by using the plastic screw (part no:3).
9. With the screw M4 (Part no: 4) assemble the fixing bracket to the refrigerator.
10. If your appliance is Tropical class then fix Screw M4 to the "T" hole on the bracket; if your
appliance is Normal class the fix Screw M4 to the "N" hole on the bracket.
11. Do the same actions to the 2nd fixing part.
Figure -1
Quantity
2 pcs
2 pcs
2 pcs
2 pcs
4 2 1
HOLE
3
T N
For fixing Bracket (Part no: 2) to the appliance
For fixing Bracket (Part no: 2) to the wall
Main part for fixing
For fixing Plastic screw (Part no: 3) to the
wall.
Figure -2
EN - 6 -
Used
N
T