Service Headers And Jumpers - Cisco SE-CL-L3 Installation Manual

Service Headers and Jumpers

Service Headers and Jumpers
This server includes two blocks of headers (J38, J39) that you can jumper for certain service and debug
functions.
This section contains the following topics:
•
•
•
•
•
•
Figure 45: Location of Service Header Blocks J38 and J39
1 Location of header block J38
2 J38 pin 1 arrow printed on motherboard
3 Clear CMOS: J38 pins 9 - 10
Cisco Application Services Engine Hardware Installation Guide
78
Using the Clear CMOS Header (J38, Pins 9 - 10), on page 79
Using the BIOS Recovery Header (J38, Pins 11 - 12), on page 80
Using the Clear Password Header (J38, Pins 13 - 14), on page 81
Using the Boot Alternate Cisco IMC Image Header (J39, Pins 1 - 2), on page 82
Using the Reset Cisco IMC Password to Default Header (J39, Pins 3 - 4), on page 83
Using the Reset Cisco IMC to Defaults Header (J39, Pins 5 - 6), on page 84
6 Location of header block J39
7 J39 pin 1 arrow printed on motherboard
8 Boot Cisco IMC from alternate image: J39 pins 1 -
2
Maintaining the Server