Maintaining the Server
Figure 13: Removing the Top Cover
1
Top cover
Serial Number Location
The serial number for the server is printed on a label on the top of the server, near the front. See
the Server Top Cover, on page
Hot Swap vs Hot Plug
Some components can be removed and replaced without shutting down and removing power from the server.
This type of replacement has two varieties: hot-swap and hot-plug.
• Hot-swap replacement—You do not have to shut down the component in the software or operating
28.
system. This applies to the following components:
2
Locking cover latch
3
Serial number label location
Cisco Application Services Engine Hardware Installation Guide
Serial Number Location
Removing
29