Service Headers And Jumpers - Cisco UCS C220 M5 Maintaining

Maintaining the Server
Figure 44: Screw Locations for Removing the PCBA
Step 3
Using a screwdriver, remove the screws.
Step 4 Remove the PCBA and dispose of it properly.

Service Headers and Jumpers

This server includes two blocks of headers (J38, J39) that you can jumper for certain service and debug
functions.
This section contains the following topics:
•
•
•
•
•
•
Using the Clear CMOS Header (J38, Pins 9 - 10), on page 80
Using the BIOS Recovery Header (J38, Pins 11 - 12), on page 81
Using the Clear Password Header (J38, Pins 13 - 14), on page 83
Using the Boot Alternate Cisco IMC Image Header (J39, Pins 1 - 2), on page 84
Using the Reset Cisco IMC Password to Default Header (J39, Pins 3 - 4), on page 84
Using the Reset Cisco IMC to Defaults Header (J39, Pins 5 - 6), on page 85
Service Headers and Jumpers
Maintaining the Server
79