Cisco SE-CL-L3 Installation Manual page 5

A P P E N D I X A Server Specifications
Enabling or Disabling the Internal USB Port
Replacing the RTC Battery
Replacing Power Supplies
Replacing AC Power Supplies
Replacing a PCIe Card
PCIe Slot Specifications
Replacing a PCIe Card
Cisco Virtual Interface Card (VIC) Considerations
Replacing an mLOM Card
Replacing an mRAID Riser (Riser 3)
Replacing a SAS Storage Controller Card (RAID or HBA) in Riser 3
Storage Controller Card Firmware Compatibility
Replacing a SAS Storage Controller Card (RAID or HBA)
Replacing a Boot-Optimized M.2 RAID Controller Module
Cisco Boot-Optimized M.2 RAID Controller Considerations
Replacing a Cisco Boot-Optimized M.2 RAID Controller
Replacing the Supercap (RAID Backup)
Replacing a SATA Interposer Card
Replacing a Chassis Intrusion Switch
Installing a Trusted Platform Module (TPM)
TPM Considerations
Service Headers and Jumpers
Using the Clear CMOS Header (J38, Pins 9 - 10)
Using the BIOS Recovery Header (J38, Pins 11 - 12)
Procedure 1: Reboot With recovery.cap File
Procedure 2: Use BIOS Recovery Header and bios.cap Recovery File
Using the Clear Password Header (J38, Pins 13 - 14)
Using the Boot Alternate Cisco IMC Image Header (J39, Pins 1 - 2)
Using the Reset Cisco IMC Password to Default Header (J39, Pins 3 - 4)
Using the Reset Cisco IMC to Defaults Header (J39, Pins 5 - 6)
85
Server Specifications
85
Physical Specifications
57
58
59
59
60
60
61
65
66
73
75
76
77
77
78
79
80
85
Cisco Application Services Engine Hardware Installation Guide
64
68
68
69
70
70
71
80
81
81
82
83
84
Contents
v