Accessing The Software Raid Configuration Utility; For More Raid Utility Information - Cisco SE-CL-L3 Installation Manual

Storage Controller Considerations
Step 3
Press F10 to save your changes and exit the utility.

Accessing the Software RAID Configuration Utility

To configure RAID settings for the embedded SATA RAID controllers, use the utility that is built into the
BIOS. Each controller is controlled by its own instance of the utility.
Step 1 Boot the server and press F2 when prompted to enter the BIOS Setup utility.
Step 2
Choose the Advanced tab.
Step 3 Select the instance of the utility that is for the controller that you want to manage (primary or secondary):
• For the pSATA controller, select LSI Software RAID Configuration Utility (SATA).
• For the sSATA controller, select LSI Software RAID Configuration Utility (sSATA).

For More RAID Utility Information

The Broadcom utilities have help documentation for more information about using the utilities.
• For basic information about RAID and for using the utilities for the RAID controller cards that are
• For hardware SAS MegaRAID
• For embedded software MegaRAID and the utility that is accessed via the server BIOS (refer to Chapter
supported in Cisco servers, see the
Version 2.8
4)—Broadcom Embedded MegaRAID Software User Guide, March
Accessing the Software RAID Configuration Utility
Cisco Servers RAID Guide.
configuration—Broadcom 12Gb/s MegaRAID SAS Software User Guide,
Cisco Application Services Engine Hardware Installation Guide
2018.
99