ASSEMblY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. You will need an open-end wrench and Phillips screwdriver for assembly.
1
Align holes in lid Retainer
C
Slide M6x18 Washer
through holes and secure with M6x9 lock Washer
A
M6x15 Nut
. Repeat with remaining 2 lid Retainers.
Tighten hardware.
Hardware Used: 6x M6x15 Screw/Nut,
2
Align holes in Handle
C
Slide M6x18 Washer
through holes and secure with M6x9 lock Washer
A
M6x15 Nut
. Tighten hardware.
Hardware Used: 2x M6x15 Screw/Nut,
Contact us for assistance: (866) 985-7877 | www.wtliving.com
to interior holes in lid
A
onto M6x15 Screw
, then insert
B
M6x9 Lock Washer,
M6x18 Washer
with exterior holes in lid
A
onto M6x15 Screw
, then insert
B
M6x9 Lock Washer,
M6x18 Washer
.
and
.
1
and
2
5