Advertisement
ASSEMblY
6
Attach Handle
to bowl
A
M6x15 Screw
, then insert through holes and secure with
B
M6x9 lock Washer
and M6x15 Nut
to bowl using M5x10 Screw/Nut
NOTE: When the fire bowl is in use, it is best to keep the air vent
closed as opening the air vent will decrease the air circulation
and cause your fire to diminish.
Hardware Used: 2x M6x15 Screw/Nut,
7
Place bowl
on leg assembly. Be sure the Handle
directly above the U-leg
holes in the leg stand assembly. Slide M6x18 Washer
E
M6x35 Screw
, then insert through holes in the bowl and
leg Assembly and secure with M6x9 lock Washer
C
M6x35 Nut
. Repeat for other side. Tighten all hardware.
Hardware Used: 4x M6x35 Screw/Nut,
Contact us for assistance: (866) 985-7877 | www.wtliving.com
. Slide M6x18 Washer
A
. Attach Air Vent
H
.
M6x9 Lock Washer,
M6x18 Washer
1x M5x10 Screw/Nut
. Align holes in bowl with the
B
M6x9 Lock Washer,
M6x18 Washer
C
onto
6
is
C
onto
6
and
7
7
Advertisement
