Table of Contents
Advertisement
ASSEMBLY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. NOTE: it is recommended to use TWO PEOPLE to assemble this gas fire
pit. Estimated assembly time: 60 minutes. | Do NOT overtighten hardware!
1
Locate 4 Panels D/E/F. NOTE: There is a hole at the bottom
of each Side Panel E. The hole should face DOWN. Place a
Washer P on each of 8 Bolts N and insert through holes of
Side Panels into the holes of Leg Panels D/F.
Tighten all Bolts N with Hex Key/Wrench S.
Hardware:
2
Once all Panels are bolted together, carefully turn the table
base upside-down. Attach Gas Tank Support Bar G to Side
Panels E by aligning holes in Gas Tank Support Bar with
holes in the bottom of Side Panels. Insert Bolt O through
Washer P into holes and tighten with Hex Key/Wrench S.
Hardware:
Contact us for assistance: (866) 985-7877 | www.wtliving.com
N Bolt (6x25mm) x 8
P Washer (6mm) x 8
O Bolt (6x18mm) x 2
P Washer (6mm) x 2
E
D
E
1
2
F
N
P
LEG
O
P
5
Advertisement
Table of Contents
