Advertisement
ASSEMblY
3
Align holes in Connecting brackets
and the Screen Door
need to face to the outside of screen sections, and tabs on
top of connecting brackets need to face to the outside of
screen sections). Slide M6x18 Washer
A
Screw
and through the hole in the Connecting bracket and
Screen. Secure with M6x9 lock Washer
Repeat with remaining Connecting brackets.
Hardware Used: 8x Connecting Brackets
4
To attach the Door latch
latch with the hole in the Screen Door
D
M5x10 Screw
and secure with M5x10 lock Nut
Tighten all hardware.
Hardware Used: 1x M5x10 Screw/Lock Nut
5
Insert the U-leg
into the ends of the 2 leg Stands
and align holes. Slide M6x18 Washer
E
Screw
, then insert through holes and secure with M6x9
B
lock Washer
and M6x35 Nut
Insert Axle
through the holes on the 2 leg Stands. Then slide
Wheel
over end of Axle. Place M12x22 Washer
of Axle and secure Wheel with M10 lock Nut
other side. Tighten all hardware.
Hardware Used: 2x M6x35 Screw,
Contact us for assistance: (866) 985-7877 | www.wtliving.com
I
with the Screens
. (Note: Connecting brackets
C
onto M6x15
B
and M6x15 Nut
16x M6x15 Screw/Nut,
M6x9 Lock Washer,
M6x18 Washer
, align the hole in the Door
and insert
D
C
onto M6x35
E
. Repeat for other side.
F
G
. Repeat for
M6x9 Lock Washer,
M6x18 Washer, M6x35 Nut,
M12x22 Washer, M10 Lock Nut
A
.
.
over end
5
3
3
4
6
Advertisement
