Factory Setting; En Fr - TechniSat VIOLA 2 Instruction Manual

8.4 Factory setting

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and then launch a new scan.
> Hold down the Info/Menu button and use the Tune + or Tune - buttons to select
the [System] item.
> Press the Enter button.
> Using the Tune + or Tune - buttons, select the [Factory setting] item and press
Enter.
> Using the Tune + or Tune - buttons, select the [Yes] item to run the factory
setting and press the Enter button.
All previously stored stations and settings will now be deleted. The device is now
in the same status as when delivered.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
59