Connecting The Power Supply Unit - TechniSat VIOLA 2 Instruction Manual

4.3.2 Connecting the power supply unit

> To do this, connect the plug on the power supply unit included with supply to
the jack labelled with DC 6V on the rear of the Viola 2. Then connect the power
supply unit to the mains supply.
Ensure that the operating voltage of the power supply unit matches the mains
voltage before you insert it into the wall socket.
When you connect the device to the mains for the first time,
"Welcome to Digital Radio" appears on the display. This will then be followed by
a station scan via DAB+. Please refer to the information in Section 4.4.1.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
33