Overview Thank you for purchasing the EC-VP-1100A Android POS terminal. We are committed to use up-to-date technology and provide better after-sales service continuously. Please take time to read this user manual before system installation. Note: Information in this user manual may change without prior notice 1.
This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were derived for commercials and industrial environments to provide reasonable protection against interference with licensed communication equipment. EC-VP-1100A User Manual – V1...
4.3 Rear Panel I/O Connectors At the rear panel of the EC-VP-1100A is a row of external I/O device connectors. Detail as below: COM1& 4 - For connection of serial devices USB*4 - Connection to devices LAN - RJ-45 Ethernet connection to Giga-bit LAN...
Getting Start: This chapter describes preparation before use the EC-VP-1100A. The following topics are described. 5.1 Unpacking Below are the items should include in the carton box: Adaptor EC-VP-1100A Power cable Quick start guide If any of the above item is missing, please contact you dealer.
Turn off the power immediately whenever problem occurs. Do not maintain and disassemble the units, contact the authorized person for service. Check the cable connection to make sure they are connected correctly. Disconnect the power when the terminal is not going to use for a period of time. EC-VP-1100A User Manual – V1...
Some regions do not allow exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you EC-VP-1100A User Manual – V1...
Page 12
Manufacturer: EC LINE Thank you very much for using EC Line product For service, please contact service@ecline.com.hk www.eclinepos.com EC-VP-1100A User Manual – V1...
Need help?
Do you have a question about the EC-VP-1100A and is the answer not in the manual?
Questions and answers