Symbols Used In This Manual; Symbols On The Power Tool; Important Safety Information - Flex LD 15-10 125 Original Operating Instructions

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . . 14
Important safety information . . . . . . . . . 14
Noise and Vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 17
Overview . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating instructions . . . . . . . . . . . . . . 19
Maintenance and care . . . . . . . . . . . . . . 22
Disposal information . . . . . . . . . . . . . . . 22
-Declaration of Conformity . . . . . . . . 22
Exemption from liability . . . . . . . . . . . . . 23

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the
old machine (see page 22)!
14
LD 15-10 125 R / LD 15-10 125 / LDE 15-10 125 R

Important safety information

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has been
constructed in accordance with the acknow-
ledged safety regulations. Nevertheless,
when in use, the power tool may be a danger
to life and limb of the user or a third party,
or the power tool or other property may be
damaged. The power tool may be operated
only if it is
used as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.
Intended use
The renovation sander LD 15-10 125 R /
LD 15-10 125 / LDE 15-10 125 R
is designed
- for commercial use in industry and trade,
- for dry sanding and smoothing of
concrete, plaster, screed, sandstone,
chamotte and asphalt,
- for grinding paintwork and adhesive
residue off concrete or screed,
- for use with diamond-tipped tools which
FLEX offers for this power tool and which
are authorised to run at a speed of at
least 10,000 r.p.m.
It is not permitted to use cutting-off wheels,
roughing wheels, fan-like grinding wheels or
wire brushes.
When using the renovation sander
LD 15-10 125 R / LD 15-10 125 /
LDE 15-10 125 R, connect a Class M dust
extractor.
no.: 315.915),
-