Replacing The Filter Media; Environmental Information; Transcend Software User Guide - Transcend 365 miniCPAP User Manual

Transcend 365 miniCPAP User Manual

Replacing the Filter Media

During therapy, ambient air is drawn into
the Transcend 365 miniCPAP through an
Air Inlet Filter. The Filter Media is very
simple to replace. Simply turn the unit
over and look for the door on one end that
pops open easily.
Open door to remove the used filter
media, replace with new filter media and
secure the filter door. The filter media
should be replaced after 6 months of use—
or sooner if it is dirty.

Environmental Information

This Machine should be disposed of separately, not as unsorted municipal waste. To
dispose of your machine, you should use appropriate collection and recycling systems
available in your region. If information on these disposal systems in needed, please
contact your local waste administration.

Transcend Software User Guide

Your Transcend 365 miniCPAP device comes with easy-to-use software that helps you
adjust settings, observe, print and send reports and store all your data so you can access
it any time.
3 Simple Steps and you're ready to use your software.
STEP 1
Start by downloading the device software onto your computer using this link:
NOTE:
You must install the driver before downloading the software.
https://transcend.miniCPAPsoftware.com
Flip open door
Remove filter
Page 39