Battery - Transcend 365 miniCPAP User Manual

Transcend 365 miniCPAP User Manual
NOTE:
Fully charge the battery before the first use. Follow the battery
charging instructions provided in the User Manual. Do not connect
the battery to the Transcend 365 miniCPAP during the battery's
initial charge.
NOTE: The CPAP draws power from the battery while connected. If the
battery is not used in line with the AC power supply, unplug the
battery from the CPAP when not in use.
NOTE: Allow up to 20 seconds for the CPAP to complete the battery status
check and power up after connecting to the battery.
NOTE:
Using the battery in-line with the AC power supply charges the
battery during therapy and provides backup power for uninterrupted
therapy in the case of a power outage.
Charging the P
10
Connect the power outlet barrel connector from the Universal Power Supply to the
•
power connection jack on the P
Connect the Universal Power Supply to a power source.
•
A full battery charge is indicated when the LED light gauge is lit to 100%.
•
It may take up 7 hours to charge the P10 battery.
•

Battery

Battery.
10
P battery properly
10
connected to the device.
Page 36