Table of Contents
Advertisement
Brought To You By Augusta Flint
prolonged exposure to high noise levels is hazardous to hearing. Always wear
1.
ANSI-approved hearing protection when operating or working around the Rabbeting
Jointer when it is running.
1.
WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
Improperly connecting the grounding wire can result in the risk of electric shock.
check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the power
cord or plug is damaged. If damaged, have it repaired by a service facility before
use. If the plug will not fit the outlet, have a proper outlet installed by a qualified
electrician.
GROuNDeD TOOlS: TOOlS WITH THRee pRONG pluGS
1.
Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
for technical questions, please call 1-800-444-3353.
SKU 32966
NOISe pRecAuTION
MIScellANeOuS pRecAuTION
GROuNDING
WARNING!
fIGuRe A
Page 6
Advertisement
Table of Contents
