Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. #39741 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
1. Insert the threaded end of the Shaft (#9) into the Base (#12). Use Flat Washer (#11), Lock Washer (#13) and two Nuts (#10) to tightly secure the Shaft - see the Parts Diagram for proper assembly order of hardware. #39741 For technical questions, please call 1-800-444-3353. Page 3...
Page 4
Tap the lead wheel weights to secure them to the rim. 4. Once balanced, remove the wheel from the Flange Set (#1). Note: Wheel Clipper Tool is available from Harbor Freight Tools. Rev 2000f #39741 For technical questions, please call 1-800-444-3353. Page 4...
Part Number Listing and Parts Diagram Part # Description Flange Set Spring Screw ST2.2x10 Level Bubble Washer Bubble Spring Balancing Cone Set 1 Retaining Pin Shaft Nut M20x1.5A Flat Washer Base Lock Washer #39741 For technical questions, please call 1-800-444-3353. Page 5...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 #39741 For technical questions, please call 1-800-444-3353. Page 6...