Table of Contents
Advertisement
60
Cockpit
Display with multi-function display (MFD)*
The multi-function display (MFD) shows you information on
the journey and fuel consumption.
The multi-function system uses two automatic memories: 1 - Actual
memory and 2 - Total memory. The selected memory will be shown
in the upper right-hand corner of the display.
Selecting a memory
– When the ignition is on, briefly press button
windscreen wiper lever to change from one memory to another or
press button
Resetting a memory
– Select the memory that you would like to reset.
– Hold down button
on the steering wheel controls for at least 2 seconds.
Fig. 39 Rocker buttons A
The trip memory 1 collects the travel and consumption rates from the
and B. Steering wheel
moment the ignition is switched on until it is switched off. If the journey is
controls.
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automatically
be deleted if the journey is interrupted for more than two hours.
The journey memory 2 collects the journey data for any number of individual
journeys (even if the ignition is switched off for longer than two hours) up to
a total of 99 hours and 59 minutes travel time, 9,999 km distance travelled
and 999 litres of fuel consumed. The memory will automatically be deleted if
one of the named values is reached.
Fig. 40 Digital display in
the instrument panel
⇒ fig. 39
A
on the steering wheel controls
A
A
on the windscreen wiper lever or button
A
A
on the
A
⇒ fig.
39.
A
A
Advertisement
Table of Contents
