Table of Contents
Advertisement
116
Lights and visibility
Indicator and main beam headlight lever
The turn signal and main beam lever also operates the
parking lights and the headlight flasher.
The turn signal and main beam headlight lever has the following
functions:
Switching on the turn signals
– Move the lever all the way up
right, and all the way down
Signalling a lane change
A
– Push the lever up
resistance and then release it. The turn signal will flash several
times. The corresponding warning lamp will also flash.
Fig. 77 Indicator and
main beam headlight
lever
⇒ page 116, fig. 77
A
A
to indicate left.
2
A
or down
to the point where you incur
1
2
Switching main beam on and off
– Turn the light switch to position
– Press the lever forward
main beams.
– Pull the lever back towards you to switch the main beam head-
lights off again.
Headlight flashers
– Pull the lever towards the steering wheel
flasher.
Switching on parking lights
– Switch the ignition off and remove the key from the lock.
– Move the lever up or down to turn the right or left-hand parking
lights on, respectively.
WARNING
The main beam can dazzle other drivers. Risk of accident! Never use the
main beam headlights or the headlight flasher if they could dazzle other
to indicate
1
drivers.
Note
•
The turn signals only work when the ignition is switched on. The corre-
sponding warning lamp
lamp
flashes when the turn signals are operated, provided a trailer is
correctly attached and connected to the vehicle. If a turn signal bulb is defec-
tive, the warning lamp flashes at double speed. If the trailer turn signal bulbs
are damaged, warning lamp
.
⇒ page 116, fig. 77
A
to switch on the
3
A
to operate the
4
or
flashes in the instrument panel. The warning
does not light up. Change the bulb.
Advertisement
Table of Contents
