Table of Contents
Advertisement
20
Seat belts
The warning lamp*
is switched off if the driver seat belt is fastened while
the ignition is switched on.
Why wear seat belts?
Physical principles of frontal collisions
In the event of a frontal collision, a large amount of kinetic
energy must be absorbed.
It is easy to explain how the laws of physics work in the case of a head-on
collision: When a vehicle starts moving
energy known as "kinetic energy", both in the vehicle and in the occupants.
The amount of "kinetic energy" depends on the speed of the vehicle and the
weight of the vehicle and its passengers. The higher the speed and the
greater the weight, the more energy there is to be "released" in an accident.
The most significant factor, however, is the speed of the vehicle. If the speed
doubles from 25 km/h to 50 km/h, for example, the kinetic energy is multi-
Fig. 7 Vehicle about to hit
plied by four.
a wall: the occupants are
Because the passengers in our example are not restrained by seat belts, the
not wearing seat belts
entire amount of kinetic energy has to be absorbed at the point of impact
⇒ fig.
Even at speeds of 30 km/h to 50 km/h, the forces acting on bodies in a colli-
sion can easily exceed one tonne (1000 kg). At greater speed these forces are
even higher.
Passengers not wearing seat belts are not "attached" to the vehicle. In a
frontal collision, they will move forward at the same speed their vehicle was
⇒ fig. 7
8.
Fig. 8 The vehicle hits
the wall: the occupants
are not wearing seat belts
there is a certain amount of
Advertisement
Table of Contents
