Table of Contents
Advertisement
256
If and when
⇒ page 255, fig. 182
– Remove the loops
the arrow and remove the cover.
– Remove the connector
– Disengage the retainer spring
inwards to the right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Main beam lights
A
in the direction of
1
⇒ page 255, fig. 183
A
from the bulb.
2
⇒ page 255, fig. 183
A
3
Fig. 184 Main beam
headlights
pressing
– Raise the bonnet.
– Remove the cover
– Remove the connector
– Press the spring
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Fig. 185 Main beam
headlights
⇒ fig. 184
A
by pulling on this.
C
⇒ fig. 185
A
from the bulb.
1
⇒ fig. 185
A
inwards and to the right.
2
Advertisement
Table of Contents
