Table of Contents
Advertisement
Jack position points for vehicles with skirting*
Vehicles with plastic skirting, with cover*
A
– Remove the cap
A
⇒ fig.
175.
– Pull on the cover and remove it from its allotment in the direction
⇒ fig.
of the arrow
– Once the cover has been released, it will remain connected to its
strap so that is not lost.
Safety First
Fig. 175 Plastic skirting
with jack allotment cover
to access the anchor point for the vehicle jack
175.
Operating instructions
Removing and fitting the wheel
For removal and fitting the wheel, the following tasks must be
completed.
After loosening the wheel bolts and raising the vehicle with the jack,
cange the wheel as described below:
Removing a wheel
– Unscrew the bolts using the hexagonal tool in the handle of the
screwdriver (vehicle tool) and place them on a clean surface
⇒ fig.
176.
Fitting a wheel
– Screw in the wheel bolts and tighten them lightly using the
hexagonal socket in the screwdriver handle.
Practical tips
If and when
Fig. 176 Changing the
wheel: Hexagonal socket
in screwdriver handle to
turn the wheel bolts
Technical Data
245
Advertisement
Table of Contents
