Table of Contents
Advertisement
50
Child safety
Securing child seat with the "ISOFIX" system
The child seat with "ISOFIX" system can be secured quickly,
easily and safely on the rear outer seats using the system
When removing or fitting the child seat, please be sure to follow the
manufacturer's instructions.
– Move the seat as far to rear as it will go.
– Press the child seat onto the "ISOFIX" retaining rings until the
child seat can be heard to engage securely.
– Pull on both sides of the child seat to ensure that it is secure.
Two "ISOFIX" retaining rings are fitted on each rear seat. In some vehicles, the
rings are secured to the seat frame and, in others, they are secured to the rear
floor. The access to "ISOFIX" rings is between the rear back rest and the seat.
Child seats with "ISOFIX" mountings are available in your Authorised Service
Centres.
•
The retaining rings are designed only for use with "ISOFIX" child seats.
•
Never secure child seats without the "ISOFIX" system, retaining belts
or objects to the fastening rings – this can result in potentially fatal injuries
to the child.
•
Ensure that the child seat is secured correctly by using the "ISOFIX"
anchors.
Fig. 31 ISOFIX securing
rings
WARNING
Advertisement
Table of Contents
